Bring Level 2 charging home, with built-in SmartAmp load management that adjusts charging power to your household's available electrical capacity. Choose the connector that fits your vehicle, then plan installation with a qualified electrician.
11.5 kW
48 A
25 ft Charging Cable
Type 4 Enclosure
Loading carousel layout...
Two Schneider Charge models. One smart charging platform.
Schneider Charge is a hardwired Level 2 AC EV charger for residential use. Built-in SmartAmp dynamic load management adjusts charging output as household electrical demand changes and can help some homes avoid an electrical service upgrade. The charging station supports up to 11.5 kW / 48 A where the installation and vehicle permit, and is offered with J3400 (NACS) or J1772 connectors.
Loading carousel layout...
Schneider Charge combines a Level 2 charging station with load management and app scheduling, so the choice is about the home installation as well as the vehicle.
Manage Capacity
Make room for EV charging - SmartAmp dynamically adjusts charge output as household demand changes. It can help manage limited electrical capacity without a separate energy-monitoring gateway.
Control the Timing
Charge on your schedule - Use the Schneider Charge app to monitor charging sessions and schedule charging around applicable time-of-use electricity rates.
Built for Home
Inside or out - A Type 4 enclosure, 25-foot cable and choice of connector provide flexibility for residential garage or exterior wall installations.
SmartAmp monitors household electrical demand and adjusts EV charging output automatically. When the home is using more electricity, it reduces charging output; when other loads fall, it can increase output again. Monitoring uses the current transformers included with Schneider Charge. SmartAmp load management continues to operate without a Wi-Fi connection.
Speak to Our Team
Contact Province Electric to talk through panel capacity, installation requirements, or which charger fits your needs.
The Schneider Charge app lets you monitor sessions and plan charging for time-of-use periods. Select a schedule that fits your household routine and local tariff.
Monitor a charging session
Schedule a charging window
See when SmartAmp load management is active
A qualified electrician should review the home electrical service, the wiring route and the vehicle connector before ordering or installing the charger.
1. Confirm the vehicle connector
Select NACS (J3400) or J1772 based on the vehicle's charge port and any relevant adapter requirements.
2. Assess electrical capacity
Review panel and service capacity and determine whether SmartAmp managed-load installation is permitted by the local AHJ.
3. Install and commission
Hardwire the unit and configure it according to the Schneider Charge installation guide; eSetup supports commissioning.
Loading carousel layout...
11.5 kW
48 A
25 ft Charging Cable
Type 4 Enclosure
Schneider Charge NACS
For a vehicle with a matching NACS (J3400) charge port.
Schneider Charge J1772
For a vehicle with a matching J1772 charge port.
