Crouse hinds by eaton

Crouse-Hinds TECK050 3 TECK Armored Cable Gland, Aluminum, 1/2" NPT, Outer Sheath 0.72-0.88"

Crouse-Hinds TECK125 8 Armoured Cable Gland, Aluminum, 1-1/4" NPT, Outer Sheath 1.35-1.62"

Crouse-Hinds SG1 PVC Rigid/IMC Self-Retaining Gasket, 3/8 Inch-1/2 Inch, Steel Ring

Crouse-Hinds RE32 Rigid/IMC Reducer, 1 Inch NPT to 3/4 Inch NPT, Steel, Class I Division 1

Crouse-Hinds TECK125 10 TECK Cable Gland, 1-1/4" NPT, Aluminum, Outer Sheath 1.60-1.87"

Crouse-Hinds S232 Duplex Receptacle Cover, 2-Gang, Sheet Steel, Surface Mount, 4.28 Inch Length

Crouse-Hinds 370G Condulet Form 7 Wedge Nut Cover, Sheet Steel, 1 Inch, 0.2 lb

Crouse-Hinds DS23 Duplex Receptacle Cover, Sheet Steel, Surface Mount, Single-Gang, 4.28 Inch Height

Crouse-Hinds 1B Rigid/IMC Cable & Conduit Hanger, 3/4 Inch EMT/Rigid Conduit, Steel, With Bolt

Crouse-Hinds 170 Condulet Form 7 Wedge Nut Cover, Sheet Steel, 1/2 Inch, 3.63 Inch Height

Crouse-Hinds LT50 Eaton Crouse-Hinds series Liquidator liquidtight connector, FMC, Straight, Non-insulated, Malleable iron, 1/2"

Crouse-Hinds EYS116 Eaton Crouse-Hinds series EYS conduit sealing fitting, Male and female, Feraloy iron alloy and/or ductile iron, Vertical or horizontal, Group B rated, 1/2"

Crouse-Hinds GASK571 Neoprene Condulet Form 7 Gasket, 1/2 Inch, 3.63 Inch Height, 1.31 Inch Depth

Crouse-Hinds TECK075 5 TECK Armoured Cable Gland, Aluminum, 3/4" NPT, Outer Sheath 0.88-1.06"

Crouse-Hinds TECK050 4 TECK Armoured Cable Gland, Aluminum, 1/2" NPT, Outer Sheath 0.82-0.98"

Crouse-Hinds DSS100 Sheet Steel Single-Gang Flush Mount Blank Cover, 3.51 Inch x 5.1 Inch

Crouse-Hinds ARE23 Back Box 20A/30A Cast Aluminum 3/4 Inch One Hub 4.25 Inch x 4.5 Inch

Crouse-Hinds ARE33 Cast Aluminum Back Box, 20A/30A, 1 Inch, 4.25 Inch Width, 4.5 Inch Height

Crouse-Hinds TECK050 1 Armoured Cable Gland, Aluminum, 1/2" NPT, Outer Sheath 0.52-0.65"

Crouse-Hinds TECK125 9 TECK Cable Gland, 1-1/4" NPT, Aluminum, Outer Sheath: 1.50-1.62"

Crouse-Hinds TECK150 12 Aluminum Armoured Cable Gland, 1-1/2" NPT, Outer Sheath: 1.90-2.19"

Crouse-Hinds UNY205 Steel Union 3/4 Inch Rigid/IMC Male Group B Rated Fitting

Crouse-Hinds 0B EMT & Rigid/IMC Conduit Hanger, 1/2 Inch EMT, 3/8 & 1/2 Inch Rigid, Steel

Crouse-Hinds 470G Condulet Form 7 Wedge Nut Cover, Sheet Steel, 1-1/4 Inch, 5.5 Inch Height