Strain Relief Grips

Hubbell Wiring Device-Kellems 073031205 Non-Insulated Dusttight Grips, 1.25 Inch NPT, Cable Diameter 0.97-1.25 Inch

Thomas & Betts 2548 1IN CORD CONNECTOR .880-1.065 RANGE

Techspan Industries 7304-004 BUS DROP GRIP SGL-EYE .53-.73

Hubbell Wiring Device-Kellems 07310001 I-Grips Wire Management .32-0.43 Inch Galvanized, 140 lb. Strength

Hubbell Wiring Device-Kellems 073031204 Kellems Dusttight Strain Relief Grips, .73-.97 Inch, 1 Inch, Aluminum

Hubbell Wiring Device-Kellems 073031210 Insulated Dusttight Grips, Strain Relief, 0.73-0.97 Inch, 1 Inch

Pass & Seymour FC70 Flexcor® Support Grips, Single Eye, 0.70-0.85 Inch Cable, 9 Inch Bale Length

Pass & Seymour BOX52 Strain Relief Grips, 3/4 Inch NPT, 0.520-0.730 Inch, 450 lbs Breaking Strength

Techspan Industries 7304-003 BUS DROP GRIP SGL-EYE .41-.56

Techspan Industries 7304-005 BUS DROP GRIP SGL-EYE .70-.85

Techspan Industries 7304-006 BUS DROP GRIP SGL-EYE .82-1.00

Techspan Industries 7304-002 BUS DROP GRIP SGL-EYE .30-.43

Techspan Industries 7304-001 BUS DROP GRIP SGL-EYE .22-.32

Techspan Industries 7304-007 BUS DROP GRIP SGL-EYE .96-1.25

Microlectric GT516 GUY THIMBLE

Leviton L7503-100 Strain Relief Grip, 0.40"-0.54" Cable, 1/2" NPT, Light Duty, Dust Tight

Leviton L7711-100 Deluxe Cord Strain Relief Grip, 0.25"-0.38" Cable, 3/4" NPT, 4.5" Mesh Length

Hubbell Wiring Device-Kellems 07310005 Kellems I-Grips, 0.85-1.00 Inch, Galvanized Steel Mesh

Pass & Seymour FC52 Flexcor® Support Grips, Single Eye, 0.53-0.73 Inch Cable Diameter, 1100 lbs Break Strength

Killark ZN103-MG 1/2 Inch Aluminum 90° Cord Connector with Mesh Grip, Cord Range .187-.250

Meltric CG125AM CORD GRIP CORD GRIP MESH METAL 1/2" NPT .562-.625"

Meltric CG122AM CORD GRIP CORD GRIP MESH METAL 1/2" NPT .375-.438"

Meltric CG124AM CORD GRIP CORD GRIP MESH METAL 1/2" NPT .500-.562"

Eaton DC100250 Eaton strain relief deluxe cord gri — Nec Hazardous Rating: Class I, Division 2 Class II, Division 2 Class III Class II, Division 1 Class III{NHR7} Class II, Division 1{NHR5} Class II, Division 2{NHR6} Class I, Division 2{NHR2}, Cord Diameter: 0.25-0.31 in, Fitting Size: 1/2 in, Angle: Straight, Gender: Male