T8 Linear & U-Bend Single Lamp Ballast, 28/30W, 120/240/277V, 18 Inch
Lutron

Lutron EC5T8RWJUNV1 T8 Linear & U-Bend Single Lamp Ballast, 28/30W, 120/240/277V, 18 Inch

  • MPN: EC5T8RWJUNV1
  • UPC: 027557963909
  • PPN: LUT-EC5T8RWJUNV1
  • UNSPSC: 39101901

CAD

$404.69

/ EA

Available to Order

Lead times may vary. For an accurate estimate please contact us.

Available To Ship Immediately:0

Looking to buy a large quantity?

To View Branch Inventory And Your Custom Pricing

Spec sheet

Description

T8 Linear & U-Bend Single Lamp Ballast, 28/30W, 120/240/277V, 18 Inch

Features

  • Maximize the benefits of a lighting management system. Offers continuous, flicker-free 100 % to 10 % dimming; ideal for use where saving energy, increasing flexibility, and maximizing productivity are the goals of the lighting design. Integral sensor connection provides power for and responds to one occupancy sensor, one photo sensor, and one personal control input (infrared receiver or wallstation). Communicates status and sensor inputs over the EcoSystem digital link. Programmed rapid start design ensures full rated lamp life while dimming and cycling. Lamps turn on to any dimmed level without flashing to full brightness. Low harmonic distortion throughout the entire dimming range. Frequency of operation ensures that ballast does not interfere with infrared devices. End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life. Ultra-quiet operation. Non-volatile memory restores all ballast settings after power failure. Ballast maintain consistent light output for linear lamp lengths. Protected from miswires of any input to power to control lead, or from lamp leads to each other and/or ground. 100 % performance tested at factory. Custom ballast factors available. Design tool and specifications can be found at www.lutron.com/ballasttool
  • Continuous, flicker-free dimming from 100% to 10%
  • Integral sensor connection provides power for and responds to one occupancy sensor, one photo sensor, and one personal control input (infrared receiver or wallstation)
  • Communicates status and sensor inputs over the EcoSystem digital link
  • Programmed rapid start design ensures full rated lamp life while dimming and cycling
  • Lamps turn on to any dimmed level without flashing to full brightness
  • Low harmonic distortion throughout the entire dimming range
  • Frequency of operation ensures that ballast does not interfere with infrared devices
  • End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life
  • Non-volatile memory restores all ballast settings after power failure
  • Ballasts maintain consistent light output for linear lamp lengths (e.g., 4 ft [1.5 m], 3 ft [1 m], 2 ft [0.5 m] have same relative output)
  • Maximize the benefits of a lighting management system
  • Offers continuous, flicker-free 100 % to 10 % dimming; ideal for use where saving energy, increasing flexibility, and maximizing productivity are the goals of the lighting design
  • Ultra-quiet operation
  • Ballast maintain consistent light output for linear lamp lengths
  • Protected from miswires of any input to power to control lead, or from lamp leads to each other and/or ground. 100 % performance tested at factory
  • Custom ballast factors available
  • Design tool and specifications can be found at www.lutron.com/ballasttool

Documentation & Downloads

Specifications

Key Specifications

Amperage Rating
0.24@120 V/0.12@240V/0.11@277V, 30 W lamps. 0.22@120 V/0.11@240V/0.10@277V, 28 W lamps
Ballast Factor
0.85
Frequency Rating
50/60 Hz
Lamp Type
T8 Linear and U-Bend
Minimum Starting Temperature
50 F
Number Of Lamps
1
Start Type
Programmed rapid
Total Harmonic Distortion
Less than 10%
Voltage Rating
120/240/277 V
Width
1.18 in
ApplicationLighting Control
ColorWhite
Height1 in
Length18 in
MountingFixture
Power FactorGreater than 0.95
Thermal ProtectionClass P
TypeBallast
Wattage28/30 W

Similar Products

Loading carousel layout...

CAD$404.69/ EA

Loading add to cart quantity...

banner

Need assistance?

We can help! Connect with our Sales Team Today!