Weidmuller 2618730000 Solid-State Relay 24V DC, 2A, 1 NO Contact, 6.4mm Width, TS 35 Rail

MPN: 2618730000
PPN: WDM-2618730000

$126.58

Available to Order from Manufacturer

Lead times may vary. For an accurate estimate please contact us.

Available To Ship Immediately:0

Loading add to cart quantity...

Looking to buy a large quantity?

To View Branch Inventory And Your Custom Pricing

Spec sheet

Compare

Description

TERMSERIES, solid-state relais, 1 NO contact (MOS-FET), Rated control voltage: 24 V UC ±10 % , Rated switching voltage: 3...33 V DC, Continuous current: 2 A, PUSH IN with actuator

Documentation & Downloads

Specifications

General Data

Rail	TS 35
UL 94 flammability rating	V-0

Colour	black

Probability Of Failure

MTTF	976 Years

Load Side

Rated switching voltage	3...33 V DC
Rated switching current	2 A
Switch-on delay	< 6.5 ms
Voltage drop at max. load	≤ 120 mV
Min. switching current	5 mA
Protective circuit, load side	Rectifier
max. switching frequency (DC control voltage)	10 Hz

Continuous current	2 A
Inrush current	15 A / 10 ms
Switch-off delay	< 10 ms
Leakage current	< 10 µA
Short-circuit-proof	No
max. switching frequency (AC control voltage)	3 Hz

Approvals

Approvals	CULUS, EAC

UL File Number Search	E141197

Dimensions And Weights

Width	6.4 mm
Height	89.4 mm
Depth	87.8 mm
Net weight	0 g

Width (inches)	0.252 inch
Height (inches)	3.52 inch
Depth (inches)	3.457 inch

Connection Data

Wire connection method	PUSH IN with actuator
Clamping range, rated connection	1.5 mm²
Clamping range, max.	2.5 mm²
Wire connection cross section AWG, max.	AWG 14
Wire cross-section, solid, max.	2.5 mm²
Wire connection cross section, finely stranded, max.	2.5 mm²
Wire cross-section, finely stranded, max. (AWG)	AWG 14
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.	1.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	1.5 mm²
Twin wire-end ferrules, max.	1 mm²

Stripping length, rated connection	8 mm
Clamping range, min.	0.14 mm²
Wire connection cross section AWG, min.	AWG 26
Wire cross-section, solid, min.	0.14 mm²
Wire connection cross-section, finely stranded, min.	0.14 mm²
Wire cross-section, finely stranded, min. (AWG)	AWG 26
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.	0.15 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	0.15 mm²
Twin wire-end ferrules, min.	0.5 mm²
Blade size	0.4 x 2.0 mm

Contact Data

Contact type	1 NO contact (MOS-FET)

Control Side

Rated control voltage	24 V UC ±10 %
Power rating	154 mW
Status indicator	Green LED
Coil voltage of the replacement relay deviating from the rated control voltage	Yes

Nominal control current	10 mA AC ±20 %, 6 mA DC (±20 %)
Cut-in / dropout voltage	18 V / 12 V AC14 V / 13 V DC
Protective circuit	Rectifier
Coil voltage of the replacement relay	24 V DC

Classifications

ETIM 6.0	EC001504
eClass 9.0	27-37-16-04
eClass 10.0	27-37-16-04

ETIM 7.0	EC001504
eClass 9.1	27-37-16-04

Insulation Coordination

Rated voltage	300 V
Surge voltage category	III
Dielectric strength for control side - load side	2.5 kVeff
Impulse withstand voltage	6 kV (1.2/50 µs)

Pollution severity	2
Clearance and creepage distances for control side - load side	≥ 5.5 mm
Dielectric strength to mounting rail	4 kVeff / 1 Min.
Protection degree	IP20

Temperatures

Humidity	5-95% relative humidity, Tu = 40°C, without condensation
Operating temperature, min.	-20 °C
Storage temperature, min.	-40 °C
Storage temperature	-40 °C...70 °C