Tripp Lite SMART3000RM2UN 3000VA 2.25kW Line-Interactive UPS, 2U Rack/Tower, Pure Sine Wave, WEBCARDLX

MPN: SMART3000RM2UN
UPC: 037332177902
PPN: TRP-SMART3000RM2UN

$3646.52

Available to Order

Lead times may vary. For an accurate estimate please contact us.

Available To Ship Immediately:0

Loading add to cart quantity...

Looking to buy a large quantity?

To View Branch Inventory And Your Custom Pricing

Spec sheet

Compare

Description

3000VA 2.25kW Line-Interactive UPS, 2U Rack/Tower, Pure Sine Wave, WEBCARDLX

Features

3000VA 3000W 120V Tripp Lite series SmartPro Line-Interactive UPS
WEBCARDLXE network management card (pre-installed)
USB cable
Micro USB cable
DB9 cable
Rack-mounting hardware
Tower support stands

Documentation & Downloads

Specifications

Additional

Output Volt Amp Capacity (VA)	3000 VA / 3 kVA
Power Factor	0.75
Frequency Compatibility	60 Hz
Output Voltage Regulation (Battery Mode)	+/- 5%
Rated input current (Maximum Load)	24 A
Recommended Electrical Service	30 A 120V
Battery Runtime Full Load	3.5 min (2250 W)
DC System Voltage (VDC)	48 V
Voltage Regulation Description	Automatic Voltage Regulation (AVR) maintains line power operation with input voltage 83 to 145 V
Undervoltage Correction	Input voltages between 96 and 108 V boosted by 12%
Surge Suppression Joule Rating	570
Storage Temperature Range	5 to 122 F (-15 to 50 C)
BTU Output Full Load	189 BTU/hr AC Mode, 1356 BTU/hr Battery Mode
Operating Elevation	0 to 10,000 ft (0 to 3000 m)
Low Voltage Transfer Setpoint	83 V
Cold Start Support	Yes
Load Management Receptacles	Two switchable single-outlet load banks
Input Cord Length	10 ft
Battery Access	Front panel battery access door
Dimensions (H W D)	3.43 in 17.32 in 19.46 in (87 mm 440 mm 494 mm)
Front Panel LCD Display	Interactive LCD with detailed UPS and site power data
Audible Alarm	Audible alarm with alarm-cancel and silent mode
Cooling Method	Fan
Optional Mounting Accessories	2-post rackmount, tower, wallmount kits available
Network Interface Speed	10/100 Mbps auto-sensing
SNMP Compatibility	SNMP v1, v2c, v3
Warranty	2 years standard, 3 years with registration

Output Watt Capacity (Watts)	2250 W
Nominal Output Voltage(s) Supported	110V, 115V, 120V
Output Voltage Regulation (Line Mode)	-14% to +6%
Output AC Waveform (Battery Mode)	Pure Sine wave
Nominal Input Voltage(s) Supported	120 V AC
Input Phase	Single-Phase
Battery Runtime Half Load	10 min (1125 W)
Battery Recharge Time	Less than 4.5 hours (10% to 90%)
Overvoltage Correction	Input voltages between 127 and 145 V reduced by 12%
Severe Undervoltage Correction	Input voltages between 83 and 95 V boosted by 24%
Operating Temperature Range	32 to 104 F (0 to 40 C)
Relative Humidity	0 to 95% non-condensing
Efficiency	98% line-mode efficiency
Transfer Time	5 ms (AC to Battery), 1 ms (Battery to AC)
High Voltage Transfer Setpoint	145 V
Output Receptacles	(8) 5-15/20R; (1) L5-30R
UPS Input Connection Type	NEMA L5-30P
Expandable Runtime	Yes, up to 1600 W with external battery packs
Battery Replacement	Hot-swappable, user replaceable batteries
Weight	62.8 lbs (28.49 kg)
Switches	Power ON/OFF, MODE, MUTE/ENTER (3 pushbutton switches)
LED Indicators	Network Link/Activity, Network Speed (10/100 Mbps), LX Platform status
Mounting Accessories Included	Included 4-post rackmount kit (4POSTRAILKIT)
Communications Interfaces	DB9 Serial, EPO (RJ11), Micro-USB, Pre-installed WEBCARDLX Network Card, RJ45 Network, USB A, USB B (HID enabled)
Protocol Support	HTTP, HTTPS, SMTP, SNMPv1/v2/v3, telnet, SSH, FTP, DHCP, NTP
Grounding Lug	Included on back panel
Compliance & Certifications	FCC Part 15 Category A, RoHS, Tested to CSA, NOM, UL1778