Tripp Lite SMX700HG Medical-Grade 700VA Tower UPS with 6 Outlets, USB, and Full Isolation

MPN: SMX700HG
UPC: 037332140418
PPN: TRP-SMX700HG

$1685.23

Available to Order

Lead times may vary. For an accurate estimate please contact us.

Available To Ship Immediately:0

Loading add to cart quantity...

Looking to buy a large quantity?

To View Branch Inventory And Your Custom Pricing

Spec sheet

Compare

Description

SmartPro 230V 700VA 450W Medical-Grade Line-Interactive Tower UPS with 6 Outlets, Full Isolation, USB, DB9

Features

USB monitoring cable, 1.8 m (6 ft.)
DB9 serial monitoring cable, 1.8 m (6 ft.)
Owner's Manual

Documentation & Downloads

Specifications

Additional

Capacity	700 VA, 450 W
Runtime Half Load	36 minutes at 225 W
Surge Suppression	340 joules
Plug Type	IEC320 C14 hospital-grade
Voltage Regulation	Corrects brownouts 155 to 274V
Output Volt Amp Capacity	700 VA
APS AC Suppression Joule Rating	340
Input Phase	Single-Phase
UPS Input Cord Length	0.5 ft.
DC System Voltage	36 VDC
AC Mode BTU/hr. (Full Load)	208.6
Severe Undervoltage Correction	Input 155-182 V boosted 21%
Recommended Electrical Service	10A 230V
Grounding Lug	Equipotential connection (back panel grounding lug)
Communications Interface	USB; DB9 Serial
Primary UPS Depth	229 mm
Shipping Dimensions (H x W x D)	18.5 x 12.2 x 13.38 in.
UPS Certifications	UL 60601-1, EN60601-1-2:2015 4th Edition, CE
UPS Power Module Weight	42.1 lbs. / 19.1 kg
Storage Temperature Range	5 to 122 F / -15 to 50 C
Battery Access	Hot swap replacement without power off
Primary UPS Width	191 mm
Frequency Compatibility	50 / 60 Hz, automatic frequency selection
Nominal Output Voltage Supported	220 V, 230 V, 240 V
AC Suppression Response Time	Instantaneous
Rated Input Current (Maximum Load)	3.6 A
Undervoltage Correction	Input 183-199 V boosted 10%
Relative Humidity	0 to 95%, non-condensing
Primary Form Factor	Tower
Installation Form Factors Supported	Wallmount (with optional UPSWM kit)
Product Warranty Period	2-year limited warranty

Output Voltage	230 V nominal
Runtime Full Load	14.5 minutes at 450 W
Output Receptacles	6 IEC320 C13 hospital-grade
Isolation	Full isolation with built-in isolation transformer and Faraday shield
Leakage Current	Less than 100 microamps
Voltage Compatibility	230 V
UPS Type	Line-Interactive
Battery Recharge Rate	Less than 3.6 hours from 10% to 90% (typical, full load discharge)
Operating Temperature Range	32 to 104 F / 0 to 40 C
Switches	2 front panel push-button for system enable, self-test, alarm cancel
Cooling Method	Rear-exit cooling fan
Internal UPS Replacement Battery Cartridge	RBC36SLT
Output AC Waveform	PWM sine wave
Low Voltage Transfer to Battery Power	155 V
Typical Battery Lifespan	3-6 years depending on usage
Primary UPS Height	325 mm
Voltage Regulation Description	Line interactive UPS with 2 brownout boost levels and 1 overvoltage adjustment across 155-274 V AC
Expandable Runtime	No
High Voltage Transfer to Battery Power	274 V
Transfer Time	5 milliseconds
UPS Input Connection Type	C14 inlet
Overvoltage Correction	Input 206-245 V AC reduced 9%
Output Voltage Regulation (Line Mode)	-18% to +8%
Cold Start	Supported
Nominal Input Voltage Supported	230 V AC
UPS Power Module Dimensions (H x W x D)	12.8 x 7.5 x 9 in.
UPS Housing Material	PVC
EMI / RFI AC Noise Suppression	Yes
LED Indicators	5 LEDs for power, battery, overload, voltage regulation, battery status
Audible Alarm	3-function alarm for power failure, overload, low battery; factory muted