Documentation & Downloads
APC SMT3000RMI2UNC Smart-UPS 3000VA Rackmount 2U 230V Line Interactive with 12 Outlets, AVR, LCD
- MPN: SMT3000RMI2UNC
- UPC: 731304327707
- PPN: APC-SMT3000RMI2UNC
Available to Order
Lead times may vary. For an accurate estimate please contact us.
Company Stock:
0
Looking to buy a large quantity?
To view product inventory
Spec sheet
Description
Smart-UPS 3000VA Rackmount 2U 230V Line Interactive with 12 Outlets, AVR, LCD
Features
- Adjustable voltage sensitivity — Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Adjustable voltage-transfer points — Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
- Audible alarms — Provides notification of changing utility power and UPS power conditions
- Automatic restart of loads after UPS shutdown — Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test — Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notification — Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Boost and Trim Automatic Voltage Regulation (AVR) — Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- Cold-start capable — Provides temporary battery power when the utility power is out.
- Disconnected battery notification — Warns when a battery is not available to provide backup power.
- Energy meter — Provides actual kilowatt hours of usage for energy conscious users.
- Frequency and voltage regulation — Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Green mode — Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency — Reduces utility costs, generates less heat.
- Hot-swappable batteries — Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Intelligent battery management — Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Intelligent Card Slot — Customize UPS capabilities with management cards.
- Intuitive LCD interface — Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- LED Indicators — Provide easy-to-read status of the unit and utility power conditions.
- Network manageable — Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
- Outlet group control — Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
- Predictive failure notification. — Provides early-warning fault analysis ensuring proactive component replacement.
- Predictive replace battery date — Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Preinstalled network management card — Provides for remote management and control of the UPS over a network out of the box.
- Pure sine wave output on battery — Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Safety-agency approved — The UPS is UL1778 Listed
- Sequenced network shutdown and reboot — Customize network shutdown and reboot sequence of connected servers and UPSs.
- Serial connectivity — Provides management of the UPS via a serial port.
- Single switched outlet group — Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- StruxureWare Data Center Expert compatible — Enables centralized management via StruxureWare Data Center Expert.
- Temperature-compensated battery charging — Prolongs battery life by regulating the charge voltage according to battery temperature.
- USB connectivity — Provides management of the UPS via a USB port (not available on all models).
- User-replaceable batteries — Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Wide input voltage range — Designed for harsh electrical environments to save battery life.
Documentation & Downloads
Specifications
Additional
- Power Capacity
- 2700 W / 3000 VA
- Output Frequency
- 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
- Output Connections
- 12 outlets including (8) IEC320 C13, (1) IEC320 C19
- Surge Energy Rating
- 320 J
- Battery Management
- Intelligent, temperature-compensated charging
- Input Connection Type
- BS1363A British, IEC 320 C20, Schuko CEE 7 / EU1-16P
- Warranty
- 3 years electronics, 2 years battery
- Width
- 48.0 cm (18.9 in)
- Net Weight
- 44.28 kg (96 lb)
- Product Orientation
- Rack
- Topology
- Line interactive
- RoHS Compliance
- Compliant
Nominal Output Voltage230 V (configurable to 220 or 240 V)
Waveform TypeSine wave
Input Voltage230 V (range 150 - 300 V)
Voltage RegulationBoost and Trim Automatic Voltage Regulation (AVR)
Output WaveformPure sine wave on battery
Battery TypeMaintenance-free sealed lead-acid, leak proof
Height8.6 cm (3.39 in)
Depth68.3 cm (26.89 in)
Interface PortsRJ-45 10/100 Base-T, RJ-45 Serial, SmartSlot, USB
Rack Height2U
Mount PositionFront
Regulatory ApprovalsCE, EAC, GS Mark, IRAM, RCM, VDE, UL1778 Listed
Similar Products
Loading carousel layout...
Loading carousel layout...
Available to Order
Lead times may vary. For an accurate estimate please contact us.
Company Stock:
0
Looking to buy a large quantity?
To view product inventory
Spec sheet
